Jetting for Yamaha KT100 Kart 1.1



Publisher Description



This app provides, for the current weather conditions and a given engine configuration (engine model, gas, etc.), a jetting recommendation for Yamaha KT100 engines. In order to get the weather values, the application can use the GPS to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS and internet connection, in this case, the user has to give the weather data. The application is made up of four tabs that are described next. - Results: In this tab, a recommended jetting setup is shown. These data are calculated depending on the weather conditions and the engine and track configuration given in the following tabs. The following values are given: high needle, low needle, pop-off pressure and fulcrum arm height. Besides this jetting information, the air density and density altitude are shown too. In addition, this tab lets do a fine tunning adjustment for the high and low needles to adapt to the concrete engine. These values will be stored and used in the future sessions. - Weather: In the second tab, called Weather, you can set the values for current temperature, pressure, altitude and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab). - Engine: You must set in this screen the information about the engine, that is, the engine type (Tuned Pipe / long pipe, 4-hole and 3-hole can, junior with standard WB3A carb or junior with smaller WA55 carb), the oil mix ratio and the type of the circuit (sprint or enduro, short or long tracks). Depending of the track type, the jetting setups will be adapted. - GPS: This tab allows to use the GPS to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity). The application works with different measure units: inHg, mb, mmHg, hPa, atm for pressure, C and F for temperature.

Requires iOS 7.0 or later. Compatible with iPhone, iPad, and iPod touch.


About Jetting for Yamaha KT100 Kart

Jetting for Yamaha KT100 Kart is a paid app for iOS published in the Health & Nutrition list of apps, part of Home & Hobby.

The company that develops Jetting for Yamaha KT100 Kart is Ingenieria del Software ISEnet S.L.. The latest version released by its developer is 1.1.

To install Jetting for Yamaha KT100 Kart on your iOS device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2015-10-22 and was downloaded 5 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the Jetting for Yamaha KT100 Kart as malware if the download link is broken.

How to install Jetting for Yamaha KT100 Kart on your iOS device:

  • Click on the Continue To App button on our website. This will redirect you to the App Store.
  • Once the Jetting for Yamaha KT100 Kart is shown in the iTunes listing of your iOS device, you can start its download and installation. Tap on the GET button to the right of the app to start downloading it.
  • If you are not logged-in the iOS appstore app, you'll be prompted for your your Apple ID and/or password.
  • After Jetting for Yamaha KT100 Kart is downloaded, you'll see an INSTALL button to the right. Tap on it to start the actual installation of the iOS app.
  • Once installation is finished you can tap on the OPEN button to start it. Its icon will also be added to your device home screen.



RELATED PROGRAMS
Our Recommendations






BarCode2D-PNG


Click stars to rate this APP!

Users Rating:  
  0.0/5     0
Downloads: 5
Updated At: 2024-03-19
Publisher: Ingenieria del Software ISEnet S.L.
Operating System: Ios
License Type: Paid